This installer is suitable for most ESP32 boards with 4MB flash memory

1. Connect your ESP32 device to a USB port
2. Select the software you want to install
3. Click "Connect" and then select the correct COM port. No ESP32 board found?
4. The programming will take less than 3 minutes
5. Power cycle your device
6. Connect to the WiFi network "My_Truck", My_Trailer", "Servotester_Deluxe" (defaults) or similar. The default password is 123456789
7. Open 192.168.4.1
8. Change SSID, password, MAC address, trailer options etc. to fit your needs
9. Power cycle your device again
10. Optional, of course: Buy me a coffee

Order your Hardware here


For source code visit my GitHub


My channel on YouTube


Powered by ESP Web Tools


Inspired by Der RC Modellbauer